dmesg - Gigabyte AMD Picasso

Return To Gigabyte AMD Picasso System Information

Linux version 5.8.13-300.fc33.x86_64 (mockbuild@bkernel01.iad2.fedoraproject.org) (gcc (GCC) 10.2.1 20200826 (Red Hat 10.2.1-3), GNU ld version 2.35-10.fc33) #1 SMP Thu Oct 1 20:49:47 UTC 2020
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009e01fff] usable
BIOS-e820: [mem 0x0000000009e02000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000db63afff] usable
BIOS-e820: [mem 0x00000000db63b000-0x00000000db752fff] reserved
BIOS-e820: [mem 0x00000000db753000-0x00000000dbbd3fff] usable
BIOS-e820: [mem 0x00000000dbbd4000-0x00000000dbce3fff] ACPI NVS
BIOS-e820: [mem 0x00000000dbce4000-0x00000000dcbeefff] reserved
BIOS-e820: [mem 0x00000000dcbef000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000039effffff] usable
BIOS-e820: [mem 0x000000039f000000-0x000000041effffff] reserved
NX (Execute Disable) protection: active
e820: update [mem 0xd504b018-0xd5059057] usable ==> usable
e820: update [mem 0xd504b018-0xd5059057] usable ==> usable
e820: update [mem 0xd4fa6018-0xd4fb3457] usable ==> usable
e820: update [mem 0xd4fa6018-0xd4fb3457] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x0000000009e01fff] usable
reserve setup_data: [mem 0x0000000009e02000-0x0000000009ffffff] reserved
reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
reserve setup_data: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
reserve setup_data: [mem 0x000000000a20b000-0x000000000affffff] usable
reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
reserve setup_data: [mem 0x000000000b020000-0x00000000d4fa6017] usable
reserve setup_data: [mem 0x00000000d4fa6018-0x00000000d4fb3457] usable
reserve setup_data: [mem 0x00000000d4fb3458-0x00000000d504b017] usable
reserve setup_data: [mem 0x00000000d504b018-0x00000000d5059057] usable
reserve setup_data: [mem 0x00000000d5059058-0x00000000db63afff] usable
reserve setup_data: [mem 0x00000000db63b000-0x00000000db752fff] reserved
reserve setup_data: [mem 0x00000000db753000-0x00000000dbbd3fff] usable
reserve setup_data: [mem 0x00000000dbbd4000-0x00000000dbce3fff] ACPI NVS
reserve setup_data: [mem 0x00000000dbce4000-0x00000000dcbeefff] reserved
reserve setup_data: [mem 0x00000000dcbef000-0x00000000deffffff] usable
reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000039effffff] usable
reserve setup_data: [mem 0x000000039f000000-0x000000041effffff] reserved
efi: EFI v2.70 by American Megatrends
efi: ACPI 2.0=0xdbc61000 ACPI=0xdbc61000 SMBIOS=0xdca47000 SMBIOS 3.0=0xdca46000 MEMATTR=0xda002018 ESRT=0xd6f4a898 RNG=0xdca50b98 
efi: seeding entropy pool
secureboot: Secure boot disabled
SMBIOS 3.2.0 present.
DMI: Gigabyte Technology Co., Ltd. AB350M-DS3H V2/AB350M-DS3H V2-CF, BIOS F51 08/03/2020
tsc: Fast TSC calibration failed
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x39f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFE0000000 write-back
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000d6f4a898 to 0x00000000d6f4a8d0.
e820: update [mem 0xd6f4a000-0xd6f4afff] usable ==> reserved
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x5a4ba000-0x5cd57fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DBC61000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DBC610A8 0000D4 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000DBC67E38 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000DBC61218 006C1C (v02 ALASKA A M I    01072009 INTL 20160930)
ACPI: FACS 0x00000000DBCCDE00 000040
ACPI: APIC 0x00000000DBC67F50 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000DBC680B0 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x00000000DBC680F8 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000DBC68198 000060 (v02 ALASKA A M I    01072009 AMI  01072009)
ACPI: SSDT 0x00000000DBC681F8 005419 (v02 ALASKA A M I    00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DBC6D618 003799 (v01 ALASKA A M I    00000001 INTL 20160930)
ACPI: MCFG 0x00000000DBC70DB8 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: SSDT 0x00000000DBC70DF8 00682C (v01 ALASKA A M I    00000001 INTL 20160930)
ACPI: HPET 0x00000000DBC77628 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: UEFI 0x00000000DBC77660 000042 (v01 ALASKA A M I    00000002      01000013)
ACPI: VFCT 0x00000000DBC776A8 00D484 (v01 ALASKA A M I    00000001 AMD  31504F47)
ACPI: IVRS 0x00000000DBC84B30 0000D0 (v02 ALASKA A M I    00000001 AMD  00000000)
ACPI: SSDT 0x00000000DBC84C00 000854 (v01 ALASKA A M I    00000001 AMD  00000001)
ACPI: CRAT 0x00000000DBC85458 000810 (v01 ALASKA A M I    00000001 AMD  00000001)
ACPI: CDIT 0x00000000DBC85C68 000029 (v01 ALASKA A M I    00000001 AMD  00000001)
ACPI: SSDT 0x00000000DBC85C98 0012BE (v01 ALASKA A M I    00000001 INTL 20160930)
ACPI: SSDT 0x00000000DBC86F58 00146E (v01 ALASKA A M I    00000001 INTL 20160930)
ACPI: SSDT 0x00000000DBC883C8 001EC3 (v01 ALASKA A M I    00000001 INTL 20160930)
ACPI: SSDT 0x00000000DBC8A290 0000BF (v01 ALASKA A M I    00001000 INTL 20160930)
ACPI: WSMT 0x00000000DBC8A350 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000DBC8A378 0013F0 (v01 ALASKA A M I    00000001 INTL 20160930)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000039effffff]
NODE_DATA(0) allocated [mem 0x39efd5000-0x39effffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000039effffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009ffff]
  node   0: [mem 0x0000000000100000-0x0000000009e01fff]
  node   0: [mem 0x000000000a000000-0x000000000a1fffff]
  node   0: [mem 0x000000000a20b000-0x000000000affffff]
  node   0: [mem 0x000000000b020000-0x00000000db63afff]
  node   0: [mem 0x00000000db753000-0x00000000dbbd3fff]
  node   0: [mem 0x00000000dcbef000-0x00000000deffffff]
  node   0: [mem 0x0000000100000000-0x000000039effffff]
Zeroed struct page in unavailable ranges: 13245 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000039effffff]
On node 0 totalpages: 3656771
  DMA zone: 64 pages used for memmap
  DMA zone: 26 pages reserved
  DMA zone: 3999 pages, LIFO batch:0
  DMA32 zone: 14131 pages used for memmap
  DMA32 zone: 904356 pages, LIFO batch:63
  Normal zone: 42944 pages used for memmap
  Normal zone: 2748416 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 32 CPUs, 28 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x09e02000-0x09ffffff]
PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20afff]
PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: hibernation: Registered nosave memory: [mem 0xd4fa6000-0xd4fa6fff]
PM: hibernation: Registered nosave memory: [mem 0xd4fb3000-0xd4fb3fff]
PM: hibernation: Registered nosave memory: [mem 0xd504b000-0xd504bfff]
PM: hibernation: Registered nosave memory: [mem 0xd5059000-0xd5059fff]
PM: hibernation: Registered nosave memory: [mem 0xd6f4a000-0xd6f4afff]
PM: hibernation: Registered nosave memory: [mem 0xdb63b000-0xdb752fff]
PM: hibernation: Registered nosave memory: [mem 0xdbbd4000-0xdbce3fff]
PM: hibernation: Registered nosave memory: [mem 0xdbce4000-0xdcbeefff]
PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
Built 1 zonelists, mobility grouping on.  Total pages: 3599606
Policy zone: Normal
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 14075464K/14627084K available (14339K kernel code, 2492K rwdata, 8756K rodata, 2504K init, 4648K bss, 551620K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x3e/0x610 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 43501 entries in 170 pages
ftrace: allocated 170 pages with 4 groups
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
	Trampoline variant of Tasks RCU enabled.
	Rude variant of Tasks RCU enabled.
	Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200528
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: PIT calibration matches HPET. 2 loops
tsc: Detected 3593.373 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33cbdecc159, max_idle_ns: 440795322540 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.74 BogoMIPS (lpj=3593373)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
SELinux:  Initializing.
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 40K
smpboot: CPU0: AMD Ryzen 3 3200G with Radeon Vega Graphics (family: 0x17, model: 0x18, stepping: 0x1)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1  #2  #3
smp: Brought up 1 node, 4 CPUs
smpboot: Max logical packages: 8
smpboot: Total of 4 processors activated (28746.98 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
PM: Registering ACPI NVS region [mem 0xdbbd4000-0xdbce3fff] (1114112 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
xor: automatically using best checksumming function   avx       
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 09:11:07, date: 2020-10-08
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
NET: Registered protocol family 16
DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1602148267.124:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
alg: No test for 842 (842-generic)
alg: No test for 842 (842-scomp)
raid6: skip pq benchmark and using algorithm avx2x4
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 11 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.2: enabling Extended Tags
pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
pci 0000:00:01.3: [1022:15d3] type 01 class 0x060400
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
pci 0000:01:00.0: [1022:43bb] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0xfcda0000-0xfcda7fff 64bit]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.1: [1022:43b7] type 00 class 0x010601
pci 0000:01:00.1: reg 0x24: [mem 0xfcd80000-0xfcd9ffff]
pci 0000:01:00.1: reg 0x30: [mem 0xfcd00000-0xfcd7ffff pref]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:01:00.1: PME# supported from D3hot D3cold
pci 0000:01:00.2: [1022:43b2] type 01 class 0x060400
pci 0000:01:00.2: enabling Extended Tags
pci 0000:01:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.2: PCI bridge to [bus 01-05]
pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
pci 0000:00:01.2:   bridge window [mem 0xfcc00000-0xfcdfffff]
pci 0000:00:01.2:   bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: PME# supported from D3hot D3cold
pci 0000:02:01.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:01.0: enabling Extended Tags
pci 0000:02:01.0: PME# supported from D3hot D3cold
pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:04.0: enabling Extended Tags
pci 0000:02:04.0: PME# supported from D3hot D3cold
pci 0000:01:00.2: PCI bridge to [bus 02-05]
pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
pci 0000:01:00.2:   bridge window [mem 0xfcc00000-0xfccfffff]
pci 0000:01:00.2:   bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io  0xf000-0xf0ff]
pci 0000:04:00.0: reg 0x18: [mem 0xfcc00000-0xfcc00fff 64bit]
pci 0000:04:00.0: reg 0x20: [mem 0xf0300000-0xf0303fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:01.0:   bridge window [io  0xf000-0xffff]
pci 0000:02:01.0:   bridge window [mem 0xfcc00000-0xfccfffff]
pci 0000:02:01.0:   bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:02:04.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [1987:5013] type 00 class 0x010802
pci 0000:06:00.0: reg 0x10: [mem 0xfcf00000-0xfcf03fff 64bit]
pci 0000:00:01.3: PCI bridge to [bus 06]
pci 0000:00:01.3:   bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:07:00.0: [1002:15d8] type 00 class 0x030000
pci 0000:07:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:07:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:07:00.0: reg 0x20: [io  0xe000-0xe0ff]
pci 0000:07:00.0: reg 0x24: [mem 0xfcb00000-0xfcb7ffff]
pci 0000:07:00.0: enabling Extended Tags
pci 0000:07:00.0: BAR 0: assigned to efifb
pci 0000:07:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:07:00.1: [1002:15de] type 00 class 0x040300
pci 0000:07:00.1: reg 0x10: [mem 0xfcb88000-0xfcb8bfff]
pci 0000:07:00.1: enabling Extended Tags
pci 0000:07:00.1: PME# supported from D1 D2 D3hot D3cold
pci 0000:07:00.2: [1022:15df] type 00 class 0x108000
pci 0000:07:00.2: reg 0x18: [mem 0xfca00000-0xfcafffff]
pci 0000:07:00.2: reg 0x24: [mem 0xfcb8c000-0xfcb8dfff]
pci 0000:07:00.2: enabling Extended Tags
pci 0000:07:00.3: [1022:15e0] type 00 class 0x0c0330
pci 0000:07:00.3: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit]
pci 0000:07:00.3: enabling Extended Tags
pci 0000:07:00.3: PME# supported from D0 D3hot D3cold
pci 0000:07:00.4: [1022:15e1] type 00 class 0x0c0330
pci 0000:07:00.4: reg 0x10: [mem 0xfc800000-0xfc8fffff 64bit]
pci 0000:07:00.4: enabling Extended Tags
pci 0000:07:00.4: PME# supported from D0 D3hot D3cold
pci 0000:07:00.6: [1022:15e3] type 00 class 0x040300
pci 0000:07:00.6: reg 0x10: [mem 0xfcb80000-0xfcb87fff]
pci 0000:07:00.6: enabling Extended Tags
pci 0000:07:00.6: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 07]
pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:08.1:   bridge window [mem 0xfc800000-0xfcbfffff]
pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:08:00.0: [1022:7901] type 00 class 0x010601
pci 0000:08:00.0: reg 0x24: [mem 0xfce00000-0xfce007ff]
pci 0000:08:00.0: enabling Extended Tags
pci 0000:08:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.2: PCI bridge to [bus 08]
pci 0000:00:08.2:   bridge window [mem 0xfce00000-0xfcefffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
iommu: Default domain type: Passthrough (set via kernel command line)
pci 0000:07:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0000:07:00.0: vgaarb: bridge control possible
pci 0000:07:00.0: vgaarb: setting as boot device
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x09e02000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0xd4fa6018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd504b018-0xd7ffffff]
e820: reserve RAM buffer [mem 0xd6f4a000-0xd7ffffff]
e820: reserve RAM buffer [mem 0xdb63b000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbbd4000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x39f000000-0x39fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0x39f000000-0x41effffff window] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io  0x0a00-0x0a2f] has been reserved
system 00:03: [io  0x0a30-0x0a3f] has been reserved
system 00:03: [io  0x0a40-0x0a4f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io  0x04d0-0x04d1] has been reserved
system 00:04: [io  0x040b] has been reserved
system 00:04: [io  0x04d6] has been reserved
system 00:04: [io  0x0c00-0x0c01] has been reserved
system 00:04: [io  0x0c14] has been reserved
system 00:04: [io  0x0c50-0x0c51] has been reserved
system 00:04: [io  0x0c52] has been reserved
system 00:04: [io  0x0c6c] has been reserved
system 00:04: [io  0x0c6f] has been reserved
system 00:04: [io  0x0cd0-0x0cd1] has been reserved
system 00:04: [io  0x0cd2-0x0cd3] has been reserved
system 00:04: [io  0x0cd4-0x0cd5] has been reserved
system 00:04: [io  0x0cd6-0x0cd7] has been reserved
system 00:04: [io  0x0cd8-0x0cdf] has been reserved
system 00:04: [io  0x0800-0x089f] has been reserved
system 00:04: [io  0x0b00-0x0b0f] has been reserved
system 00:04: [io  0x0b20-0x0b3f] has been reserved
system 00:04: [io  0x0900-0x090f] has been reserved
system 00:04: [io  0x0910-0x091f] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:01.0: PCI bridge to [bus 04]
pci 0000:02:01.0:   bridge window [io  0xf000-0xffff]
pci 0000:02:01.0:   bridge window [mem 0xfcc00000-0xfccfffff]
pci 0000:02:01.0:   bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:02:04.0: PCI bridge to [bus 05]
pci 0000:01:00.2: PCI bridge to [bus 02-05]
pci 0000:01:00.2:   bridge window [io  0xf000-0xffff]
pci 0000:01:00.2:   bridge window [mem 0xfcc00000-0xfccfffff]
pci 0000:01:00.2:   bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:00:01.2: PCI bridge to [bus 01-05]
pci 0000:00:01.2:   bridge window [io  0xf000-0xffff]
pci 0000:00:01.2:   bridge window [mem 0xfcc00000-0xfcdfffff]
pci 0000:00:01.2:   bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
pci 0000:00:01.3: PCI bridge to [bus 06]
pci 0000:00:01.3:   bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:00:08.1: PCI bridge to [bus 07]
pci 0000:00:08.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:08.1:   bridge window [mem 0xfc800000-0xfcbfffff]
pci 0000:00:08.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:08.2: PCI bridge to [bus 08]
pci 0000:00:08.2:   bridge window [mem 0xfce00000-0xfcefffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0xf000-0xffff]
pci_bus 0000:01: resource 1 [mem 0xfcc00000-0xfcdfffff]
pci_bus 0000:01: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xfcc00000-0xfccfffff]
pci_bus 0000:02: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xf000-0xffff]
pci_bus 0000:04: resource 1 [mem 0xfcc00000-0xfccfffff]
pci_bus 0000:04: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:07: resource 0 [io  0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xfc800000-0xfcbfffff]
pci_bus 0000:07: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xfce00000-0xfcefffff]
pci 0000:07:00.1: D0 power state depends on 0000:07:00.0
pci 0000:07:00.3: extending delay after power-on from D3hot to 20 msec
pci 0000:07:00.4: extending delay after power-on from D3hot to 20 msec
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 41592K
pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter.
pci 0000:00:00.2: can't derive routing for PCI INT A
pci 0000:00:00.2: PCI INT A: not connected
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.2: Adding to iommu group 1
pci 0000:00:01.3: Adding to iommu group 2
pci 0000:00:08.0: Adding to iommu group 3
pci 0000:00:08.1: Adding to iommu group 4
pci 0000:00:08.2: Adding to iommu group 5
pci 0000:00:14.0: Adding to iommu group 6
pci 0000:00:14.3: Adding to iommu group 6
pci 0000:00:18.0: Adding to iommu group 7
pci 0000:00:18.1: Adding to iommu group 7
pci 0000:00:18.2: Adding to iommu group 7
pci 0000:00:18.3: Adding to iommu group 7
pci 0000:00:18.4: Adding to iommu group 7
pci 0000:00:18.5: Adding to iommu group 7
pci 0000:00:18.6: Adding to iommu group 7
pci 0000:00:18.7: Adding to iommu group 7
pci 0000:01:00.0: Adding to iommu group 8
pci 0000:01:00.1: Adding to iommu group 8
pci 0000:01:00.2: Adding to iommu group 8
pci 0000:02:00.0: Adding to iommu group 8
pci 0000:02:01.0: Adding to iommu group 8
pci 0000:02:04.0: Adding to iommu group 8
pci 0000:04:00.0: Adding to iommu group 8
pci 0000:06:00.0: Adding to iommu group 9
pci 0000:07:00.0: Adding to iommu group 10
pci 0000:07:00.1: Adding to iommu group 11
pci 0000:07:00.2: Adding to iommu group 11
pci 0000:07:00.3: Adding to iommu group 11
pci 0000:07:00.4: Adding to iommu group 11
pci 0000:07:00.6: Adding to iommu group 11
pci 0000:08:00.0: Adding to iommu group 12
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
pci 0000:00:00.2: AMD-Vi: Extended features (0x4f77ef22294ada):
 PPR NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xd0ef6000-0xd4ef6000] (64MB)
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
pcieport 0000:00:01.2: PME: Signaling with IRQ 26
pcieport 0000:00:01.2: AER: enabled with IRQ 26
pcieport 0000:00:01.3: PME: Signaling with IRQ 27
pcieport 0000:00:01.3: AER: enabled with IRQ 27
pcieport 0000:00:08.1: PME: Signaling with IRQ 28
pcieport 0000:00:08.2: PME: Signaling with IRQ 29
pcieport 0000:00:08.2: AER: enabled with IRQ 29
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: No BGRT, not showing boot graphics
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
ACPI: \_PR_.C000: Found 2 idle states
ACPI: \_PR_.C001: Found 2 idle states
ACPI: \_PR_.C002: Found 2 idle states
ACPI: \_PR_.C003: Found 2 idle states
tsc: Refined TSC clocksource calibration: 3596.308 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33d6b3b196a, max_idle_ns: 440795282467 ns
clocksource: Switched to clocksource tsc
ACPI: Invalid passive threshold
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ10] (17 C)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:01:00.1: version 3.0
ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 37
ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 37
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 37
ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 37
ata7: DUMMY
ata8: DUMMY
ahci 0000:08:00.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:08:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part sxs 
scsi host8: ahci
scsi host9: ahci
ata9: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00100 irq 39
ata10: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00180 irq 40
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000048000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.8.13-300.fc33.x86_64 xhci-hcd
usb usb1: SerialNumber: 0000:01:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.8.13-300.fc33.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:01:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb: port power management may be unreliable
xhci_hcd 0000:07:00.3: xHCI Host Controller
xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 3
xhci_hcd 0000:07:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.8.13-300.fc33.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:07:00.3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:07:00.3: xHCI Host Controller
xhci_hcd 0000:07:00.3: new USB bus registered, assigned bus number 4
xhci_hcd 0000:07:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.8.13-300.fc33.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:07:00.3
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:07:00.4: xHCI Host Controller
xhci_hcd 0000:07:00.4: new USB bus registered, assigned bus number 5
xhci_hcd 0000:07:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.8.13-300.fc33.x86_64 xhci-hcd
usb usb5: SerialNumber: 0000:07:00.4
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
xhci_hcd 0000:07:00.4: xHCI Host Controller
xhci_hcd 0000:07:00.4: new USB bus registered, assigned bus number 6
xhci_hcd 0000:07:00.4: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.8.13-300.fc33.x86_64 xhci-hcd
usb usb6: SerialNumber: 0000:07:00.4
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: setting system clock to 2020-10-08T09:11:10 UTC (1602148270)
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
RPL Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: CPU0: patch_level=0x08108109
microcode: CPU1: patch_level=0x08108109
microcode: CPU2: patch_level=0x08108109
microcode: CPU3: patch_level=0x08108109
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (2810965145, -9995502)->(2804595517, -3625874)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 492d927ae6b54f0cd471a57d30a73fbad47bc899'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, crc32c=crc32c-generic
Key type encrypted registered
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
integrity: Loading X.509 certificate: UEFI:db
integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'mint Secure Boot Module Signature key: 4ed39338f10dea987a1cf0352fc4c1f3241e5399'
integrity: Loading X.509 certificate: UEFI:MokListRT
integrity: Loaded X.509 cert 'Fedora Secure Boot CA: fde32599c2d61db1bf5807335d7b20e4cd963b42'
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
PM:   Magic number: 8:195:171
acpi device:34: hash matches
RAS: Correctable Errors collector initialized.
ata10: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
usb 1-1: new low-speed USB device number 2 using xhci_hcd
usb 4-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
usb 4-2: New USB device found, idVendor=13fe, idProduct=6300, bcdDevice= 1.10
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2: Product: QUMO
usb 4-2: Manufacturer:         
usb 4-2: SerialNumber: 070002B05278C703
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD3200AAJS-22L7A0, 01.03E01, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200AAJS-2 3E01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: Attached scsi generic sg0 type 0
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
usb 1-1: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1: Product: USB Optical Mouse
usb 1-1: Manufacturer: PixArt
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-1/1-1:1.0/0003:093A:2510.0001/input/input2
hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:01:00.0-1/input0
usb 1-2: new low-speed USB device number 3 using xhci_hcd
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: HPA detected: current 976771055, native 976773168
ata2.00: ATA-8: WDC WD5000AAKX-00ERMA0, 15.01H15, max UDMA/133
ata2.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-0 1H15 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/466 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-2: New USB device found, idVendor=04f3, idProduct=0103, bcdDevice= 1.07
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
input: HID 04f3:0103 as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-2/1-2:1.0/0003:04F3:0103.0002/input/input3
 sdb: sdb1 sdb2 sdb3 sdb4
hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:01:00.0-2/input0
sd 1:0:0:0: [sdb] Attached SCSI disk
input: HID 04f3:0103 Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-2/1-2:1.1/0003:04F3:0103.0003/input/input4
input: HID 04f3:0103 System Control as /devices/pci0000:00/0000:00:01.2/0000:01:00.0/usb1/1-2/1-2:1.1/0003:04F3:0103.0003/input/input5
hid-generic 0003:04F3:0103.0003: input,hidraw2: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:01:00.0-2/input1
usb 1-8: new high-speed USB device number 4 using xhci_hcd
usb 1-8: New USB device found, idVendor=152d, idProduct=2329, bcdDevice= 1.00
usb 1-8: New USB device strings: Mfr=10, Product=11, SerialNumber=5
usb 1-8: Product: StoreJet Transcend
usb 1-8: Manufacturer: StoreJet Transcend
usb 1-8: SerialNumber: 29BB111046FF
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: HPA detected: current 1250261615, native 1250263728
ata5.00: ATA-8: ST3640323AS, SD3B, max UDMA/133
ata5.00: 1250261615 sectors, multi 16: LBA48 NCQ (depth 32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      ST3640323AS      SD3B PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdc] 1250261615 512-byte logical blocks: (640 GB/596 GiB)
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-10: new high-speed USB device number 5 using xhci_hcd
sd 4:0:0:0: [sdc] Attached SCSI disk
usb 1-10: New USB device found, idVendor=058f, idProduct=6366, bcdDevice= 1.00
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: Mass Storage Device
usb 1-10: Manufacturer: Generic
usb 1-10: SerialNumber: 058F63666471
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: LPM support broken, forcing max_power
ata6.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/100
ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32)
ata6.00: LPM support broken, forcing max_power
ata6.00: configured for UDMA/100
scsi 5:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg3 type 0
sd 5:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 5:0:0:0: [sdd] 4096-byte physical blocks
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1
sd 5:0:0:0: [sdd] Attached SCSI disk
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2504K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 1484K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
Run /init as init process
  with arguments:
    /init
    rhgb
  with environment:
    HOME=/
    TERM=linux
    BOOT_IMAGE=(hd4,gpt3)/vmlinuz-5.8.13-300.fc33.x86_64
systemd[1]: systemd v246.6-3.fc33 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: /usr/lib/systemd/system/memstrack.service:12: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/memstrack.service:13: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: /usr/lib/systemd/system/dracut-pre-udev.service:27: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/dracut-pre-udev.service:28: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/dracut-pre-trigger.service:23: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/dracut-pre-trigger.service:24: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/dracut-pre-pivot.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/dracut-pre-pivot.service:31: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/dracut-pre-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/dracut-pre-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/dracut-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/dracut-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/dracut-initqueue.service:24: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/dracut-initqueue.service:25: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/dracut-cmdline.service:26: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/dracut-cmdline.service:27: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
systemd[1]: Queued start job for default target Initrd Default Target.
systemd[1]: Reached target Local File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Timers.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Started Memstrack Anylazing Service.
systemd[1]: Started Hardware RNG Entropy Gatherer Daemon.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
fuse: init (API version 7.31)
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Finished Apply Kernel Variables.
audit: type=1130 audit(1602148272.870:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: memstrack.service: Succeeded.
audit: type=1131 audit(1602148272.875:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=memstrack comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Finished Setup Virtual Console.
systemd[1]: Starting dracut ask for additional cmdline parameters...
audit: type=1130 audit(1602148272.903:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Finished dracut ask for additional cmdline parameters.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Journal Service.
audit: type=1130 audit(1602148272.915:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline-ask comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602148272.915:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602148272.922:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602148272.965:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602148272.999:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1334 audit(1602148273.000:10): prog-id=6 op=LOAD
audit: type=1334 audit(1602148273.000:11): prog-id=7 op=LOAD
ACPI: Video Device [VGA1] (multi-head: yes  rom: no  post: no)
acpi device:10: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/LNXVIDEO:01/input/input6
acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
usb-storage 4-2:1.0: USB Mass Storage device detected
scsi host10: usb-storage 4-2:1.0
usb-storage 1-8:1.0: USB Mass Storage device detected
usb-storage 1-8:1.0: Quirks match for vid 152d pid 2329: 8020
scsi host11: usb-storage 1-8:1.0
usb-storage 1-10:1.0: USB Mass Storage device detected
scsi host12: usb-storage 1-10:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
libphy: r8169: probed
r8169 0000:04:00.0 eth0: RTL8168g/8111g, b4:2e:99:83:f3:fd, XID 4c0, IRQ 58
r8169 0000:04:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
nvme nvme0: pci function 0000:06:00.0
ccp 0000:07:00.2: enabling device (0000 -> 0002)
ccp 0000:07:00.2: ccp enabled
ccp 0000:07:00.2: tee enabled
ccp 0000:07:00.2: psp enabled
nvme nvme0: missing or invalid SUBNQN field.
nvme nvme0: allocated 128 MiB host memory buffer.
nvme nvme0: 8/0/0 default/read/poll queues
 nvme0n1: p1 p2
r8169 0000:04:00.0 enp4s0: renamed from eth0
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel 
BTRFS: device label fedora_localhost-live devid 1 transid 16006 /dev/sdb4 scanned by systemd-udevd (357)
[drm] amdgpu kernel modesetting enabled.
amdgpu: Topology: Add APU node [0x0:0x0]
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb0: switching to amdgpudrmfb from EFI VGA
amdgpu 0000:07:00.0: vgaarb: deactivate vga console
amdgpu 0000:07:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (RAVEN 0x1002:0x15D8 0x1458:0xD000 0xC9).
amdgpu 0000:07:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
[drm] register mmio base: 0xFCB00000
[drm] register mmio size: 524288
[drm] add ip block number 0 
[drm] add ip block number 1 
[drm] add ip block number 2 
[drm] add ip block number 3 
[drm] add ip block number 4 
[drm] add ip block number 5 
[drm] add ip block number 6 
[drm] add ip block number 7 
[drm] add ip block number 8 
amdgpu: ATOM BIOS: 113-PICASSO-115
[drm] VCN decode is enabled in VM mode
[drm] VCN encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
amdgpu 0000:07:00.0: amdgpu: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
amdgpu 0000:07:00.0: amdgpu: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
amdgpu 0000:07:00.0: amdgpu: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=2048M
[drm] RAM width 128bits DDR4
[TTM] Zone  kernel: Available graphics memory: 7133462 KiB
[TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
amdgpu: hwmgr_sw_init smu backed is smu10_smu
[drm] Found VCN firmware Version ENC: 1.9 DEC: 1 VEP: 0 Revision: 28
[drm] PSP loading VCN firmware
[drm] reserve 0x400000 from 0xf47fc00000 for PSP TMR
amdgpu 0000:07:00.0: amdgpu: RAS: optional ras ta ucode is not available
[drm] kiq ring mec 2 pipe 1 q 0
[drm] DM_PPLIB: values for F clock
[drm] DM_PPLIB:	 1600000 in kHz, 4399 in mV
[drm] DM_PPLIB: values for DCF clock
[drm] DM_PPLIB:	 300000 in kHz, 3149 in mV
[drm] DM_PPLIB:	 600000 in kHz, 3599 in mV
[drm] DM_PPLIB:	 626000 in kHz, 4250 in mV
[drm] DM_PPLIB:	 654000 in kHz, 4399 in mV
[drm] Display Core initialized with v3.2.84!
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] VCN decode and encode initialized successfully(under DPG Mode).
kfd kfd: Allocated 3969056 bytes on gart
amdgpu: Topology: Add APU node [0x15d8:0x1002]
kfd kfd: added device 1002:15d8
amdgpu 0000:07:00.0: amdgpu: SE 1, SH per SE 1, CU per SH 11, active_cu_number 8
[drm] fb mappable at 0x39FBCA000
[drm] vram apper at 0x39F000000
[drm] size 4325376
[drm] fb depth is 24
[drm]    pitch is 5632
fbcon: amdgpudrmfb (fb0) is primary device
fbcon: Deferring console take-over
amdgpu 0000:07:00.0: fb0: amdgpudrmfb frame buffer device
amdgpu 0000:07:00.0: amdgpu: ring gfx uses VM inv eng 0 on hub 0
amdgpu 0000:07:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
amdgpu 0000:07:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
amdgpu 0000:07:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
amdgpu 0000:07:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
amdgpu 0000:07:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
amdgpu 0000:07:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
amdgpu 0000:07:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
amdgpu 0000:07:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
amdgpu 0000:07:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
amdgpu 0000:07:00.0: amdgpu: ring sdma0 uses VM inv eng 0 on hub 1
amdgpu 0000:07:00.0: amdgpu: ring vcn_dec uses VM inv eng 1 on hub 1
amdgpu 0000:07:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 4 on hub 1
amdgpu 0000:07:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 5 on hub 1
amdgpu 0000:07:00.0: amdgpu: ring jpeg_dec uses VM inv eng 6 on hub 1
[drm] Initialized amdgpu 3.38.0 20150101 for 0000:07:00.0 on minor 0
BTRFS info (device sdb4): disk space caching is enabled
BTRFS info (device sdb4): has skinny extents
scsi 10:0:0:0: Direct-Access              QUMO             PMAP PQ: 0 ANSI: 6
sd 10:0:0:0: Attached scsi generic sg4 type 0
sd 10:0:0:0: [sde] 60604416 512-byte logical blocks: (31.0 GB/28.9 GiB)
sd 10:0:0:0: [sde] Write Protect is off
sd 10:0:0:0: [sde] Mode Sense: 45 00 00 00
sd 10:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sde: sde1 sde2
sd 10:0:0:0: [sde] Attached SCSI removable disk
scsi 11:0:0:0: Direct-Access     StoreJet Transcend             PQ: 0 ANSI: 2 CCS
sd 11:0:0:0: Attached scsi generic sg5 type 0
sd 11:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 11:0:0:0: [sdf] Write Protect is off
sd 11:0:0:0: [sdf] Mode Sense: 28 00 00 00
sd 11:0:0:0: [sdf] No Caching mode page found
sd 11:0:0:0: [sdf] Assuming drive cache: write through
 sdf: sdf1
scsi 12:0:0:0: Direct-Access     Multi    Flash Reader     1.00 PQ: 0 ANSI: 0
sd 12:0:0:0: Attached scsi generic sg6 type 0
sd 11:0:0:0: [sdf] Attached SCSI disk
sd 12:0:0:0: [sdg] Attached SCSI removable disk
SELinux:  Permission watch in class filesystem not defined in policy.
SELinux:  Permission watch in class file not defined in policy.
SELinux:  Permission watch_mount in class file not defined in policy.
SELinux:  Permission watch_sb in class file not defined in policy.
SELinux:  Permission watch_with_perm in class file not defined in policy.
SELinux:  Permission watch_reads in class file not defined in policy.
SELinux:  Permission watch in class dir not defined in policy.
SELinux:  Permission watch_mount in class dir not defined in policy.
SELinux:  Permission watch_sb in class dir not defined in policy.
SELinux:  Permission watch_with_perm in class dir not defined in policy.
SELinux:  Permission watch_reads in class dir not defined in policy.
SELinux:  Permission watch in class lnk_file not defined in policy.
SELinux:  Permission watch_mount in class lnk_file not defined in policy.
SELinux:  Permission watch_sb in class lnk_file not defined in policy.
SELinux:  Permission watch_with_perm in class lnk_file not defined in policy.
SELinux:  Permission watch_reads in class lnk_file not defined in policy.
SELinux:  Permission watch in class chr_file not defined in policy.
SELinux:  Permission watch_mount in class chr_file not defined in policy.
SELinux:  Permission watch_sb in class chr_file not defined in policy.
SELinux:  Permission watch_with_perm in class chr_file not defined in policy.
SELinux:  Permission watch_reads in class chr_file not defined in policy.
SELinux:  Permission watch in class blk_file not defined in policy.
SELinux:  Permission watch_mount in class blk_file not defined in policy.
SELinux:  Permission watch_sb in class blk_file not defined in policy.
SELinux:  Permission watch_with_perm in class blk_file not defined in policy.
SELinux:  Permission watch_reads in class blk_file not defined in policy.
SELinux:  Permission watch in class sock_file not defined in policy.
SELinux:  Permission watch_mount in class sock_file not defined in policy.
SELinux:  Permission watch_sb in class sock_file not defined in policy.
SELinux:  Permission watch_with_perm in class sock_file not defined in policy.
SELinux:  Permission watch_reads in class sock_file not defined in policy.
SELinux:  Permission watch in class fifo_file not defined in policy.
SELinux:  Permission watch_mount in class fifo_file not defined in policy.
SELinux:  Permission watch_sb in class fifo_file not defined in policy.
SELinux:  Permission watch_with_perm in class fifo_file not defined in policy.
SELinux:  Permission watch_reads in class fifo_file not defined in policy.
SELinux:  Permission perfmon in class capability2 not defined in policy.
SELinux:  Permission bpf in class capability2 not defined in policy.
SELinux:  Permission perfmon in class cap2_userns not defined in policy.
SELinux:  Permission bpf in class cap2_userns not defined in policy.
SELinux:  Class perf_event not defined in policy.
SELinux:  Class lockdown not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux:  policy capability network_peer_controls=1
SELinux:  policy capability open_perms=1
SELinux:  policy capability extended_socket_class=1
SELinux:  policy capability always_check_network=0
SELinux:  policy capability cgroup_seclabel=1
SELinux:  policy capability nnp_nosuid_transition=1
SELinux:  policy capability genfs_seclabel_symlinks=0
systemd[1]: Successfully loaded SELinux policy in 232.630ms.
systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 30.600ms.
systemd[1]: systemd v246.6-3.fc33 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
zram_generator::generator[544]: Creating dev-zram0.swap for /dev/zram0 (4096MB)
zram: Added device: zram0
systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.service:27: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.service:28: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.service:23: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.service:24: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-pivot.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-pivot.service:31: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.service:24: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.service:25: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.service:26: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.service:27: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/alsa-restore.service:15: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
systemd[1]: /usr/lib/systemd/system/mcelog.service:8: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
kauditd_printk_skb: 51 callbacks suppressed
audit: type=1334 audit(1602137480.447:63): prog-id=17 op=LOAD
audit: type=1334 audit(1602137480.448:64): prog-id=18 op=LOAD
audit: type=1334 audit(1602137480.448:65): prog-id=19 op=LOAD
audit: type=1131 audit(1602137480.449:66): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: initrd-switch-root.service: Succeeded.
systemd[1]: Stopped Switch Root.
audit: type=1130 audit(1602137480.449:67): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1602137480.449:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice Virtual Machine and Container Slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-swap\x2dcreate.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Login Prompts.
systemd[1]: Stopped target Switch Root.
systemd[1]: Stopped target Initrd File Systems.
systemd[1]: Stopped target Initrd Root File System.
systemd[1]: Reached target Paths.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on multipathd control socket.
audit: type=1334 audit(1602137480.457:69): prog-id=17 op=UNLOAD
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on User Database Manager Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Starting Preprocess NFS configuration convertion...
systemd[1]: plymouth-switch-root.service: Succeeded.
systemd[1]: Stopped Plymouth switch root service.
audit: type=1131 audit(1602137480.464:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-fsck-root.service: Succeeded.
systemd[1]: Stopped File System Check on Root Device.
audit: type=1131 audit(1602137480.464:71): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Stopped Journal Service.
audit: type=1130 audit(1602137480.464:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: sysroot.mount: Succeeded.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
BTRFS info (device sdb4): disk space caching is enabled
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped.
systemd[1]: Condition check resulted in First Boot Wizard being skipped.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Condition check resulted in Create System Users being skipped.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Journal Service.
ata2.00: exception Emask 0x11 SAct 0x200 SErr 0x480100 action 0x6 frozen
ata2.00: irq_stat 0x48000008, interface fatal error
ata2: SError: { UnrecovData 10B8B Handshk }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/00:48:48:6c:8b/0a:00:00:00:00/40 tag 9 ncq dma 1310720 in
                        res 40/00:64:48:8a:8b/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
sd 1:0:0:0: [sdb] tag#9 Sense Key : Illegal Request [current] 
sd 1:0:0:0: [sdb] tag#9 Add. Sense: Unaligned write command
sd 1:0:0:0: [sdb] tag#9 CDB: Read(10) 28 00 00 8b 6c 48 00 0a 00 00
blk_update_request: I/O error, dev sdb, sector 9137224 op 0x0:(READ) flags 0x84700 phys_seg 21 prio class 0
ata2: EH complete
ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20200528/utaddress-204)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
acpi_cpufreq: overriding BIOS provided _PSD data
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
zram0: detected capacity change from 0 to 4294967296
input: PC Speaker as /devices/platform/pcspkr/input/input7
RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain package 2^-16 Joules
kvm: Nested Virtualization enabled
SVM: kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
MCE: In-kernel MCE decoding enabled.
EDAC amd64: F17h_M10h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h_M10h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h_M10h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h_M10h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
Adding 4194300k swap on /dev/zram0.  Priority:100 extents:1 across:4194300k SSFS
snd_hda_intel 0000:07:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:07:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:07:00.6: enabling device (0000 -> 0002)
snd_hda_intel 0000:07:00.1: bound 0000:07:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:07:00.1/sound/card0/input8
input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:07:00.1/sound/card0/input9
input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:07:00.1/sound/card0/input10
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC1D0:    inputs:
snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:07:00.6/sound/card1/input11
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:07:00.6/sound/card1/input12
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:07:00.6/sound/card1/input13
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:07:00.6/sound/card1/input14
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:07:00.6/sound/card1/input15
alua: device handler registered
emc: device handler registered
rdac: device handler registered
loop: module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
kauditd_printk_skb: 27 callbacks suppressed
EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1130 audit(1602137486.661:102): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602137486.741:103): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602137486.798:104): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1602137486.962:105): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1334 audit(1602137486.995:106): prog-id=26 op=LOAD
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
ata2.00: exception Emask 0x11 SAct 0x40000 SErr 0x480100 action 0x6 frozen
ata2.00: irq_stat 0x48000008, interface fatal error
ata2: SError: { UnrecovData 10B8B Handshk }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/f8:90:48:b8:da/00:00:00:00:00/40 tag 18 ncq dma 126976 in
                        res 40/00:94:48:b8:da/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] tag#18 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
sd 1:0:0:0: [sdb] tag#18 Sense Key : Illegal Request [current] 
sd 1:0:0:0: [sdb] tag#18 Add. Sense: Unaligned write command
sd 1:0:0:0: [sdb] tag#18 CDB: Read(10) 28 00 00 da b8 48 00 00 f8 00
blk_update_request: I/O error, dev sdb, sector 14334024 op 0x0:(READ) flags 0x80700 phys_seg 31 prio class 0
ata2: EH complete
ata2.00: exception Emask 0x11 SAct 0x800 SErr 0x400100 action 0x6 frozen
ata2.00: irq_stat 0x48000008, interface fatal error
ata2: SError: { UnrecovData Handshk }
ata2.00: failed command: READ FPDMA QUEUED
ata2.00: cmd 60/30:58:68:97:5b/04:00:01:00:00/40 tag 11 ncq dma 548864 in
                        res 40/00:5c:68:97:5b/00:00:01:00:00/40 Emask 0x10 (ATA bus error)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] tag#11 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE cmd_age=0s
sd 1:0:0:0: [sdb] tag#11 Sense Key : Illegal Request [current] 
sd 1:0:0:0: [sdb] tag#11 Add. Sense: Unaligned write command
sd 1:0:0:0: [sdb] tag#11 CDB: Read(10) 28 00 01 5b 97 68 00 04 30 00
blk_update_request: I/O error, dev sdb, sector 22779752 op 0x0:(READ) flags 0x80700 phys_seg 9 prio class 0
ata2: EH complete
 sda: sda1 sda2
ata6.00: LPM support broken, forcing max_power
ata6.00: LPM support broken, forcing max_power
 sdd: sdd1
Generic FE-GE Realtek PHY r8169-400:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-400:00, irq=IGNORE)
r8169 0000:04:00.0 enp4s0: Link is Down
fbcon: Taking over console
Console: switching to colour frame buffer device 170x48
r8169 0000:04:00.0 enp4s0: Link is Up - 100Mbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
rfkill: input handler disabled
rfkill: input handler enabled
rfkill: input handler disabled
EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: (null)
tun: Universal TUN/TAP device driver, 1.6
nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
zram_generator::generator[3522]: Creating dev-zram0.swap for /dev/zram0 (4096MB)
amdgpu: pp_dpm_get_sclk_od was not implemented.

Return To Gigabyte AMD Picasso System Information